• FREE SHIPPING ON ALL US ORDERS OF $250.00 OR MORE! Use code FREESHIP$250

PRODUCTS

8.875 X 17 RMP
8.875 X 17 RMP
8.875 X 17 RMP
8.875 X 17 RMP
8.875 X 17 RMP
8.875 X 17 RMP
8.875 X 17 RMP
8.875 X 17 RMP
8.875 X 17 RMP
8.875 X 17 RMP
8.875 X 17 RMP
8.875 X 17 RMP
8.875 X 17 RMP
8.875 X 17 RMP
8.875 X 17 RMP
8.875 X 17 RMP
8.875 X 17 RMP

8.875 X 17 RMP

17 Reviews

Regular price $55.00


 


RMP Tactical Backpack Insert 


- Rigid Panel stays upright in backpack

- Attach MOLLE style pouches to organize your gear

- Customize with Adhesive Backed Loop to accept Velcro Hook Pouches

- Use GMT backer plates to hard mount a variety of accessories

- Universal fit, check compatibility chart for sizing

- 0.25" holes on edge for mounting with screws

- 1" slots for attaching handles or mounting with 1" webbing 

    The RMP was designed for modular organization on a rigid platform that allows vertical organization within a backpack. Quick access to your gear is enhanced by the consistent positioning and customizable layout. When inserted into any bag, it gives you the tactical ability to organize your mission critical gear on an interchangeable platform that can be swapped out or quickly reorganized as the mission changes.


    Product Specifications


    Width: 8.875" (225.425mm) 

    Height: 17" (431.8mm)

    Thickness: 0.188" (4.77mm)

    Material: High Strength Polyethylene 

    Weight: 7.5 ounces (212.621 grams)



    Backpack Compatibility


    The 8.875in x 17in RMP Backpack Insert fits:

    - 5.11 Tactical Rush 12 Main Compartment
    - GoRuck Bullet 10L Main Compartment
    - GoRuck Bullet 15L Main Compartment
    - GoRuck GR1 26L Rear Zipper Pouch (Hydration / Laptop Compartment)
    - GoRuck GR2 40L Hydration / Laptop Compartment
    - Maxpedition Falcon 2 (Falcon II) Main Compartment
    - Maxpedition Falcon 3 (Falcon III) Main Compartment
    - Maxpedition Sika Gearslinger (Falcon III) Main Compartment 
    - Any bag with interior dimensions equal to or greater than 8.875in wide x 17in tall

     

    Securing RMP inside Backpack

    For Backpacks with Internal Webbing:

    Some backpacks have MOLLE webbing sewn inside. You can loop a velcro one wrap, Velcro Cinch Strap, Web Dominator, or Grimloc through the internal MOLLE webbing of the backpack and secure the panel to the pack using one of those methods.

    For backpacks with Internal Velcro Loop:

    - Purchase "Low Profile Hook - Adhesive Backed - 3/4" Width" from GMT. 

    - Ensure the panel is cleaned with an alcohol wipe and completely dry.

    - Peel the backing off the adhesive backed velcro tape and place the hook section onto the panel. Press firmly into place, and then press further with a rolling pin or place heavy weight onto panel to compress and ensure full contact.

    - Apply heat from a hair dryer to warm up the panel and the velcro hook tape, enabling the adhesive to "run" or liquefy enough to seep into the panel for a better bond.

    - Optionally, use 3M Primer 94 to prime the surface before sticking the adhesive backed velcro into place. This promotes higher adhesion to the panel.

      For any backpack without internal MOLLE webbing:

      Hydration Bladder Loop

      - Secure the panel at the top of the internal main pocket by using a hydration bladder loop if available. Use Velcro one wrap or Grimloc.

      Grommet / Chicago

      - Punch a hole in the fabric and secure a grommet to prevent ripping. Use a chicago screw to secure the panel to the grommet.

      Adhesive backed Velcro

      To adhere the Adhesive backed Velcro Hook tape to your RMP panel:

      - Ensure the panel is cleaned with an alcohol wipe and completely dry.

      - Peel the backing off the adhesive backed velcro tape and place the hook section onto the panel. Press firmly into place, and then press further with a rolling pin or place heavy weight onto panel to compress and ensure full contact.

      - Apply heat from a hair dryer to warm up the panel and the velcro hook tape, enabling the adhesive to "run" or liquefy enough to seep into the panel for a better bond.

      - Optionally, use 3M Primer 94 to prime the surface before sticking the adhesive backed velcro into place. This promotes higher adhesion to the panel.

        To adhere the Loop side adhesive backed velcro to the backpack:

        - Once Velcro Hook is adhered to the panel, stick the velcro loop onto that strip on the panel as well so it is perfectly lined up

        - Flip your backpack inside out so you get an unobstructed view of the interior back panel of the bag that the rigid molle panel will fit against

        - Peel the plastic off the adhesive backed velcro loop (leaving the velcro loop stuck in place on the RMP)

        - Line up the entire RMP where you want it in the backpack and stick it down in place. Press firmly to ensure Velcro Loop side has stuck to bag, and then peel the panel/velcro hook away from the bag, careful to leave the velcro loop in place inside the bag.

        - Press further with a rolling pin or place heavy weight onto panel to compress and ensure full contact. Apply heat from a hair dryer to warm up the bag and the velcro loop tape, enabling the adhesive to "run" or liquefy enough to seep into the bag fabric for a better bond.

         

        Attaching Holsters with Quick Detach Platforms


        Set Backer Plate into punch out from back of RMP panel at desired location.
        - Accessories with multiple backer plates may need the backer plates to be oriented properly for either vertical or horizontal mounting
        - Pass screws through Female Receiver Plate and into tapped hole of backer plate from the front side of the RMP panel, screw in to secure.
        - Screw the Male Plate onto the Holster.
        - If desired mount additional Female Receiver Plates onto a belt loop, MOLLE webbing of bag or vest elsewhere, separate RMP panel in a vehicle, storage case, safe door etc. Anywhere you mount additional Female Receiver Plates will allow you to quickly secure the piece of gear that has the Male Plate to that item. The same procedure can be used to attach any accessory that requires backer plates

         
         


        Attaching MOLLE Pouches


        Standard MOLLE Pouch Attachment to Grey Man Tactical Rigid MOLLE Panel Tactical Tailor MALICE Clip MOLLE Pouch Attachment to Grey Man Tactical Rigid MOLLE Panel Tactical Tailor MALICE Clip MOLLE Pouch Attachment to Grey Man Tactical Rigid MOLLE Panel
        Maxpedition MOLLE Pouch how to attach to Grey Man Tactical Rigid MOLLE Panel WTFix Straps MOLLE pouch attachment to Grey Man Tactical Rigid MOLLE Panel WTFix Straps MOLLE Pouch attachment to Grey Man Tactical Rigid MOLLE Panel
        Duraflex Speed Sticks MOLLE Pouch Attachment to Grey Man Tactical Rigid MOLLE Panel Duraflex Speed Sticks MOLLE Pouch attachment to Grey Man Tactical Rigid MOLLE Panel Blackhawk Speed Clips MOLLE Pouch Attachment to Grey Man Tactical Rigid MOLLE Panel
        Blackhawk Speed Clips MOLLE Pouch Attachment to Grey Man Tactical Rigid MOLLE Panel G-Code Softshell Scorpion Mag Pouch and RTI Wheel attachment with backer plates to Grey Man Tactical Rigid MOLLE Panel G-Code Softshell Scorpion Mag Pouch and RTI Wheel attachment with backer plates to Grey Man Tactical Rigid MOLLE Panel

         

        Upgrading to accept Velcro Hook/Loop Pouches


        To upgrade any RMP to accept Hook backed pouches, morale patches, or accessories follow the below steps:
        To adhere the Adhesive backed Velcro Loop tape to your RMP panel:
        - Purchase "Low Profile Loop - Adhesive Backed - 1" Width" from GMT. 
        - Ensure the panel is cleaned with an alcohol wipe and completely dry.
        - Peel the backing off the adhesive backed velcro tape and place the loop section onto the panel. Press firmly into place, and then press further with a rolling pin or place heavy weight onto panel to compress and ensure full contact.
        - Apply heat from a hair dryer to warm up the panel and the velcro, enabling the adhesive to "run" or liquefy enough to seep into the panel for a better bond.
        - Optionally, use 3M Primer 94 to prime the surface before sticking the adhesive backed velcro into place. This promotes higher adhesion to the panel.

        Customer Reviews

        5 Based on 17 Reviews
        5 ★
        100% 
        17
        4 ★
        0% 
        0
        3 ★
        0% 
        0
        2 ★
        0% 
        0
        1 ★
        0% 
        0
        Customer Photos
        Write a Review

        Thank you for submitting a review!

        Your input is very much appreciated. Share it with your friends so they can enjoy it too!

        Filter Reviews:
        M
        11/30/2019
        MS
        United States United States

        Very Nice

        Love your products. Everything has a place. One of the most versatile product lines I have seen. Multiple attachment possibilities make configuration a breeze. Nothing bouncing around loose. GoRuck Bullet is great. Just ordered another.

        MS verified customer review of Rigid MOLLE Panel (RMP) - GoRuck Bullet 10L and 15L Insert - 8.875in x 17in
        A
        10/26/2019
        Anonymous
        United States United States

        Another perfect accessory for a GoRuck!

        Purchased my third GoRuck and immediately purchased my third RIP! It’s the perfect way to get the most out of any bag!

        A
        10/03/2019
        Anonymous

        Drago Tracker

        Your rigid molle panel was exactly what I was looking for. I’m happy that you even had a size to fit my existing truck bag (Drago Tracker Pictured).

        Anonymous verified customer review of Rigid MOLLE Panel (RMP) - GoRuck Bullet 10L and 15L Insert - 8.875in x 17inAnonymous verified customer review of Rigid MOLLE Panel (RMP) - GoRuck Bullet 10L and 15L Insert - 8.875in x 17inAnonymous verified customer review of Rigid MOLLE Panel (RMP) - GoRuck Bullet 10L and 15L Insert - 8.875in x 17in
        WH
        08/14/2019
        William H.
        United States United States

        Greyman Tactical, in a Rucker

        Bought the GMT molle sheet for my GoRuck Rucker. What has the addition of it done? Made everything so much more organized. With it the way I have it set up, I'm good to go with that 20L bag for an overnight in the woods.....great "get home bag" wife got one for her Bullet Ruck.....going to get one for behind the seat and one other bag I have.... If being organized and having everything readily available is what you want, then the GMT molle sheets are what you want!!

        William H. verified customer review of Rigid MOLLE Panel (RMP) - GoRuck Bullet 10L and 15L Insert - 8.875in x 17inWilliam H. verified customer review of Rigid MOLLE Panel (RMP) - GoRuck Bullet 10L and 15L Insert - 8.875in x 17in
        J
        07/30/2019
        Jeff

        5 stars

        For starters, the pack is the GoRuck Bullet 10L. There’s a MOLLE first aide pouch on the back, which was really the only organization the pack had other than the built in zipper pouches. That was my only issue with the pack, lack of organization, but it was still a cool pack. When I saw your Bullet 10L RIP-M, MOLLE panel, I knew I wanted one, but it was out of stock. So I just clicked the “notify me when available” button and within a month, I got an email from Greyman Tactical that it was back in stock. I also knew I’d just have utility and organization pouches on it. So on the RIP-M I have mounted the following pouches: small utility shingle with an admin pouch on the front, a large utility shingle with an EDC organizer and vertical utility pouch on the front. I also added your grab handle and 2 shockloops, just in case. So here’s the first impression. To begin with, I was kind of surprised that my order fit in a large envelope. Once it opened, I was very impressed. The RIP-M was packaged in a heavy weight zip-lock baggie and included a nice “label” that showed the product, the size, name, and manufacturer’s info on the front and description and instructions on the back. Upon pulling the RIP-M from the bag I immediately noticed how light it was, yet at the same time feeling strong, without being brittle. The RIP-M also had a cool and discreet Greyman Tactical logo on the very top. I grabbed my bag of spare MOLLE pouches and started laying them out. As I knew I just wanted removable internal organization (because I regular hike with the 20# plate in my Bullet), I started to layout my pouches. Once I determined what fit best, I started to mount them. I have to say it was a lot more difficult to mount them on the RIP-M than regular MOLLE webbing, but once I got the hang of it...NO BIG DEAL. The pouches are ultra secure on the RIP-M, but I noticed I usually could not weave the final bit of MALICE clips through the RIP-M and pouch as I normally would. Seeing as how this panel is just for internal organization and how stable the pouches are, this does not bother me in the least. I am also really happy with how the RIP-M fits inside the Bullet 10L. It’s perfect. Just small enough to snugly fit inside the Bullet, but big enough to not be loose and shift around. The best part...I can still fit my normal exercise loadout (full size soft shell poncho, 3L hydration bladder, and 20# Ruck plate) and RIP-M without “over loading” the Bullet or stressing the zippers. Pretty sure I could still get more on the inside of my pack too. I have yet to fill the pouches I mounted on my RIP-M, but I already can tell this panel is a great addition to a pack I already really liked. The best part is that it just drops in. So if I don’t want the extra weight of the panel or don’t need the supplies and equipment on it, I just pull it out. Really looking forward to getting some practical time with this set up and trying to convince my wife why I NEED more Greyman Tactical RIP-M’s and other products! Thanks for the cool product, solid communication, and good customer service! Jeff

        Jeff verified customer review of Rigid MOLLE Panel (RMP) - GoRuck Bullet 10L and 15L Insert - 8.875in x 17inJeff verified customer review of Rigid MOLLE Panel (RMP) - GoRuck Bullet 10L and 15L Insert - 8.875in x 17in