• Free Shipping in USA On orders over $250 Use code FREESHIP$250

PRODUCTS

9.25 X 15 RMP
9.25 X 15 RMP
9.25 X 15 RMP
9.25 X 15 RMP
9.25 X 15 RMP

9.25 X 15 RMP

29 Reviews

Regular price $50.00


 


RMP Tactical Backpack Insert 


- Rigid Panel stays upright in backpack

- Attach MOLLE style pouches to organize your gear

- Customize with Adhesive Backed Loop to accept Velcro Hook Pouches

- Use GMT backer plates to hard mount a variety of accessories

- Universal fit, check compatibility chart for sizing

- 0.25" holes on edge for mounting with screws

- 1" slots for attaching handles or mounting with 1" webbing 

    The RMP was designed for modular organization on a rigid platform that allows vertical organization within a backpack. Quick access to your gear is enhanced by the consistent positioning and customizable layout. When inserted into any bag, it gives you the tactical ability to organize your mission critical gear on an interchangeable platform that can be swapped out or quickly reorganized as the mission changes.


    Product Specifications


    Width: 9.25" (234.95mm) 

    Height: 15" (381mm)

    Thickness: 0.188" (4.77mm)

    Material: High Strength Polyethylene 

    Weight: 9.5 ounces (269.32 grams)



    Backpack Compatibility



    The 9.25in x 15in RMP Backpack Insert fits:

    - 5.11 Tactical Rush All Hazards Nitro Bag
    - 5.11 Tactical Rush 12 Hydration / Laptop Compartment
    - 5.11 Tactical Rush 24 Hydration / Laptop Compartment
    - 5.11 Tactical Rush 72 Hydration / Laptop Compartment
    - 5.11 Tactical COVRT 18 Hydration / Laptop Compartment
    - GoRuck Echo Main Compartment
    - GoRuck GR1 21L Hydration / Laptop Compartment
    - Any bag with interior dimensions equal to or greater than 9.25in wide x 15in tall
     

    Securing RMP inside Backpack

    For Backpacks with Internal Webbing:

    Some backpacks have MOLLE webbing sewn inside. You can loop a velcro one wrap, Velcro Cinch Strap, Web Dominator, or Grimloc through the internal MOLLE webbing of the backpack and secure the panel to the pack using one of those methods.

    For backpacks with Internal Velcro Loop:

    - Purchase "Low Profile Hook - Adhesive Backed - 3/4" Width" from GMT. 

    - Ensure the panel is cleaned with an alcohol wipe and completely dry.

    - Peel the backing off the adhesive backed velcro tape and place the hook section onto the panel. Press firmly into place, and then press further with a rolling pin or place heavy weight onto panel to compress and ensure full contact.

    - Apply heat from a hair dryer to warm up the panel and the velcro hook tape, enabling the adhesive to "run" or liquefy enough to seep into the panel for a better bond.

    - Optionally, use 3M Primer 94 to prime the surface before sticking the adhesive backed velcro into place. This promotes higher adhesion to the panel.

      For any backpack without internal MOLLE webbing:

      Hydration Bladder Loop

      - Secure the panel at the top of the internal main pocket by using a hydration bladder loop if available. Use Velcro one wrap or Grimloc.

      Grommet / Chicago

      - Punch a hole in the fabric and secure a grommet to prevent ripping. Use a chicago screw to secure the panel to the grommet.

      Adhesive backed Velcro

      To adhere the Adhesive backed Velcro Hook tape to your RMP panel:

      - Ensure the panel is cleaned with an alcohol wipe and completely dry.

      - Peel the backing off the adhesive backed velcro tape and place the hook section onto the panel. Press firmly into place, and then press further with a rolling pin or place heavy weight onto panel to compress and ensure full contact.

      - Apply heat from a hair dryer to warm up the panel and the velcro hook tape, enabling the adhesive to "run" or liquefy enough to seep into the panel for a better bond.

      - Optionally, use 3M Primer 94 to prime the surface before sticking the adhesive backed velcro into place. This promotes higher adhesion to the panel.

        To adhere the Loop side adhesive backed velcro to the backpack:

        - Once Velcro Hook is adhered to the panel, stick the velcro loop onto that strip on the panel as well so it is perfectly lined up

        - Flip your backpack inside out so you get an unobstructed view of the interior back panel of the bag that the rigid molle panel will fit against

        - Peel the plastic off the adhesive backed velcro loop (leaving the velcro loop stuck in place on the RMP)

        - Line up the entire RMP where you want it in the backpack and stick it down in place. Press firmly to ensure Velcro Loop side has stuck to bag, and then peel the panel/velcro hook away from the bag, careful to leave the velcro loop in place inside the bag.

        - Press further with a rolling pin or place heavy weight onto panel to compress and ensure full contact. Apply heat from a hair dryer to warm up the bag and the velcro loop tape, enabling the adhesive to "run" or liquefy enough to seep into the bag fabric for a better bond.

         

        Attaching Holsters with Quick Detach Platforms


        Set Backer Plate into punch out from back of RMP panel at desired location.
        - Accessories with multiple backer plates may need the backer plates to be oriented properly for either vertical or horizontal mounting
        - Pass screws through Female Receiver Plate and into tapped hole of backer plate from the front side of the RMP panel, screw in to secure.
        - Screw the Male Plate onto the Holster.
        - If desired mount additional Female Receiver Plates onto a belt loop, MOLLE webbing of bag or vest elsewhere, separate RMP panel in a vehicle, storage case, safe door etc. Anywhere you mount additional Female Receiver Plates will allow you to quickly secure the piece of gear that has the Male Plate to that item. The same procedure can be used to attach any accessory that requires backer plates

         
         


        Attaching MOLLE Pouches


        Standard MOLLE Pouch Attachment to Grey Man Tactical Rigid MOLLE Panel Tactical Tailor MALICE Clip MOLLE Pouch Attachment to Grey Man Tactical Rigid MOLLE Panel Tactical Tailor MALICE Clip MOLLE Pouch Attachment to Grey Man Tactical Rigid MOLLE Panel
        Maxpedition MOLLE Pouch how to attach to Grey Man Tactical Rigid MOLLE Panel WTFix Straps MOLLE pouch attachment to Grey Man Tactical Rigid MOLLE Panel WTFix Straps MOLLE Pouch attachment to Grey Man Tactical Rigid MOLLE Panel
        Duraflex Speed Sticks MOLLE Pouch Attachment to Grey Man Tactical Rigid MOLLE Panel Duraflex Speed Sticks MOLLE Pouch attachment to Grey Man Tactical Rigid MOLLE Panel Blackhawk Speed Clips MOLLE Pouch Attachment to Grey Man Tactical Rigid MOLLE Panel
        Blackhawk Speed Clips MOLLE Pouch Attachment to Grey Man Tactical Rigid MOLLE Panel G-Code Softshell Scorpion Mag Pouch and RTI Wheel attachment with backer plates to Grey Man Tactical Rigid MOLLE Panel G-Code Softshell Scorpion Mag Pouch and RTI Wheel attachment with backer plates to Grey Man Tactical Rigid MOLLE Panel

         

        Upgrading to accept Velcro Hook/Loop Pouches


        To upgrade any RMP to accept Hook backed pouches, morale patches, or accessories follow the below steps:
        To adhere the Adhesive backed Velcro Loop tape to your RMP panel:
        - Purchase "Low Profile Loop - Adhesive Backed - 1" Width" from GMT. 
        - Ensure the panel is cleaned with an alcohol wipe and completely dry.
        - Peel the backing off the adhesive backed velcro tape and place the loop section onto the panel. Press firmly into place, and then press further with a rolling pin or place heavy weight onto panel to compress and ensure full contact.
        - Apply heat from a hair dryer to warm up the panel and the velcro, enabling the adhesive to "run" or liquefy enough to seep into the panel for a better bond.
        - Optionally, use 3M Primer 94 to prime the surface before sticking the adhesive backed velcro into place. This promotes higher adhesion to the panel.

        Customer Reviews

        5.0 Based on 29 Reviews
        5 ★
        97% 
        28
        4 ★
        3% 
        1
        3 ★
        0% 
        0
        2 ★
        0% 
        0
        1 ★
        0% 
        0
        Customer Photos
        Write a Review

        Thank you for submitting a review!

        Your input is very much appreciated. Share it with your friends so they can enjoy it too!

        Filter Reviews:
        BJ
        11/23/2019
        Bill J.
        United States United States

        Frame for GR1 26L - EDC

        Great product! Very stiff (no flex). Using it in my GORUCK GR1 26L for EDC.

        Bill Jackson verified customer review of Rigid MOLLE Panel (RMP) - 9.25in x 15in
        RW
        11/11/2019
        Richard W.
        United States United States

        Rigid Insert Panel MOLLE (RIP-M) - 9.25in x 15in

        This makes a great base platform to switch between multiple packs depending on the days agenda. I've attached a general purpose pouch at the bottom which holds a multi tool, charger, first aid and whatever I may want to add. Above that is a fixed dagger, magazine or flashlight pouch and a quick release EDC pouch for my compact 380 if carrying off body, magazine, folding knife, tactical pen and notebook. Fits perfectly in my GreyGhost Throwback and Hideout packs which acts like a frame insert and helps spread the load allowing the remaining space to be used more efficiently. It also slides in nicely into my Boundary Travel pack

        Richard Wheeler verified customer review of Rigid MOLLE Panel (RMP) - 9.25in x 15inRichard Wheeler verified customer review of Rigid MOLLE Panel (RMP) - 9.25in x 15inRichard Wheeler verified customer review of Rigid MOLLE Panel (RMP) - 9.25in x 15in
        A
        10/06/2019
        anonymous

        love it

        Hey Brother, I absolutely love this thing. Thank you so much! Here's some pics of my set up.

        anonymous verified customer review of Rigid MOLLE Panel (RMP) - 9.25in x 15in
        BE
        09/23/2019
        Brandon E.
        United States United States

        9.25x15 Rigid Molle Panel

        My experience was awesome setting this panel up and installing it in my Red Rock Tactical Transporter day pack. I set this bag up as a versatile EDC/Light bug out bag. The rigid molle panel adds much needed support to the bag as well as keep my gear organized. 10/10 would recommend to anyone.

        Brandon E. verified customer review of Rigid MOLLE Panel (RMP) - 9.25in x 15in
        A
        09/08/2019
        Anonymous

        Works like a charm

        Really dig the panel! The panels are stiff and works a charm when organizing your molle pouches inside your EDC bag. I was getting tired of having to go through my man purse to find what I needed and here I find Greyman-tactical, best purchase ever. Currently running the 3V Gear "Outlaw" sling pack and the 9.5x15 fits as if they were ment to be. Thanks Greyman!

        Anonymous verified customer review of Rigid MOLLE Panel (RMP) - 9.25in x 15inAnonymous verified customer review of Rigid MOLLE Panel (RMP) - 9.25in x 15in